Install Munin Apache plugin on Ubuntu: Difference between revisions
mNo edit summary |
mNo edit summary |
||
| Line 8: | Line 8: | ||
sudo cp -s /usr/share/munin/plugins/apache_* . | sudo cp -s /usr/share/munin/plugins/apache_* . | ||
# | # verify mod_status is enabled for localhost | ||
sudoedit /etc/apache2/mods-enabled/status.conf | |||
# this command will return 'yes' if everything is configured ok | # this command will return 'yes' if everything is configured ok | ||
/etc/munin/plugins/apache_accesses autoconf | /etc/munin/plugins/apache_accesses autoconf | ||
sudoedit /etc/munin/plugin-conf.d/munin-node | |||
# add | |||
[apache_*] | |||
user root | |||
---- | |||
# another check: | # another check: | ||
Revision as of 06:19, 30 December 2009
Previously, I've installed Munin using Ubuntu's package installer. Today, I wanted to add support for monitoring Apache. I did the following commands:
<geshi lang="bash"> sudo aptitude install munin-plugins-extra sudo aptitude install liblwp-useragent-determined-perl
cd /etc/munin/plugins/ sudo cp -s /usr/share/munin/plugins/apache_* .
- verify mod_status is enabled for localhost
sudoedit /etc/apache2/mods-enabled/status.conf
- this command will return 'yes' if everything is configured ok
/etc/munin/plugins/apache_accesses autoconf
sudoedit /etc/munin/plugin-conf.d/munin-node
- add
[apache_*]
user root
- another check:
munin-run apache_accesses
sudo /etc/init.d/munin-node restart </geshi>